Filter
Top Products
27
FIRST INSTALLATION: Single-cable system (manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert help.
When the “EXR 552” single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
Press the
button to acknowledge this display. Then
press the
button. You will be asked whether you wish
to save the changes. Use the
buttons to select
“Yes, save changes” and confi rm by pressing the
button. Now press the
!
(green) button.
The receiver will automatically display the menu for the
channel search. Continue with the section (Execute channel search).
Transmission channel
Use the
buttons to select a free available transmission channel. A maximum of two transmission
channels are available (1400 and 1516 MHz).
Test connection
When you have set a free transmission channel, press the
buttons to switch to the “Test connection”
selection fi eld and press the
button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following display:
Selection “EXR 552”