Filter
Top Products
76
CONNECTING UP THE VIDEO/PVR
For details of how to connect your external recorder to the receiver refer to the connection diagram
provided at the end of this manual and the instructions for the external recorder.
In order to make a PVR recording (Record), the satellite receiver must be switched on or the timers
must be pre-programmed (see “EPG” “Recording (timer)” section).
RECORDING
For VCR/DVR playback you must fi rst press the
#
(blue) button on the UFS 910 to open the media
selection (see illustration below) then use the
buttons to set the UFS 910 Scart socket to “External
video recorder” (Scart change over). This switches the signal path through from the VCR or DVR/AUX
Scart socket to the TV Scart socket. In this setting, the picture from the external recorder is switched
through to the TV set during playback.
To restore priority to the signal from the UFS 910, you must restore the setting in the media selection
to “TV”.
PLAYBACK