Filter
Top Products
9
CONTROLS, DISPLAYS AND CONNECTIONS
This section provides a brief description of all the controls, displays and connections. The button symbols
presented here can also be found in the description of the operating steps.
Front panel controls and displays
1. Common Interface for two CA
modules for Pay-TV cards *
)
2. USB 2.0 port
3. V-format button for picture format
selection (576p/720p/1080i)
4. Menu button to call up or exit
menus or sub-menus
5. Options button to call up the
manual sound selection menu
6. Exit button for quitting the menu
7. Multifunction control
Rear panel controls and displays
1. On/Off switch (with mains disconnect)
2. Mains power cable
3. RS 232 port (for Service only)
4. Optical data stream output (SPDIF/
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
5. Ethernet port
6. HDMI socket for connection to a TV set
7. 2 x Scart sockets (TV connection above,
VCR-/AUX connection below)
8. 2 x USB 2.0 ports (USB-A connectors)
9. 3 x Cinch connections (composite colour video
output above,
L/R audio outputs below)
10. 3 x Cinch connections for component outputs
(Y/Pb/Pr)
11. 2 x SAT-IF connections (input above,
loop-through output below)
*
)
CA modules and Pay TV cards are not
included
VIEW OF FRONT PANEL (FLAP FOLDED DOWN)
VIEW OF REAR PANEL