Filter
Top Products
English
|
27
Preset position “PRESET”
Adjustment Item Display
Not compensating. “ALL”
Front-Left seat “F-LEFT”
Adjustment Item Display
Front-Right seat “F-RIGHT”
Front seat “F-ALL”
Manual position “MANUAL”
Adjustment Item Display
Front Left speaker “F-LEFT”
Front Right speaker “F-RIGHT”
Rear Left speaker “R-LEFT”
Rear Right speaker “R-RIGHT”
Adjustment Item Display
Subwoofer Left “SW-LEFT”
Subwoofer Right “SW-RIGHT”
Initialize the setting
values.
“INITIAL”
1 Enter Preset position setting mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“POSITION” > “PRESET”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Preset position setting mode
Press the [ ] button.
You can fine-adjust your listening position.
1 Enter Manual position adjust mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“POSITION” > “MANUAL”.
Press the [AUD] knob.
2 Select the speaker you want to set
Turn the [AUD] knob and push the center.
Selecting “INITIAL” initializes the Manual position ✍
adjustment.
3 Set the value
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 5.58 feet.
4 Exit Manual position adjust mode
Press the [ ] button twice.
⁄
• About the position setting
First, set the using environment with <DTA (Digital Time
Alignment) Setting> (page 29).
• When using the Subwoofer Left and Subwoofer Right as
a single sub woofer, set the left side and right side to the
same value.
Manual Equalizer Control
You can adjust following Equalizer Control items;
Adjustment Item Range
Band level “BAND#”
> “GAIN”
-9 – 0 – +9
Bass Effect* “BAND1”
> “EFFECT”
“OFF”/ “ON”
• *Can be only set for “BAND1”.
1 Enter Manual Equalizer Control mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“EQ” > “MANUAL”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the band you want to set
Turn the [AUD] knob and push the center.
“BAND1” – “BAND5”
3 Select the item you want to set
Turn the [AUD] knob and push the center.
4 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
5 Exit Manual Equalizer Control mode
Press the [ ] button twice.
⁄
• When “iPod” is selected in the section <Preset Equalizer
select> (page 26), Manual Equalizer Control is disabled.
• You can select for each source.
2. Select the iPod Equalizer curve
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Preset Equalizer mode.
Press the [
] button.
⁄
• You can select for each source.
Position Control
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;