Filter
Top Products
English
|
7
For first use
Language Setup
Set a language used for screen display, DVD subtitles,
etc.
• “Language” item of the Setup menu (page 13)
DSP Setup
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the followings:
• “MENU” > “SWPRE” of <Function Control> (page 11)
• Cabin selection (page 28)
• Speaker Setting (page 28)
• DTA (Digital Time Alignment) setting (page 29)
• X’Over setting (page 29)
⁄
• Setting “DSP SET” to “BYPASS” disables the settings related
to the DSP function. Refer to “DSP” > “DSP SET” of <Function
Control> (page 12).
Before using this unit for the first
time
Demonstration mode setting
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode setting.
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Cancel Demonstration mode (Normal mode).
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
3 Enter Menu mode
Turn the [AUD] knob to select “MENU”.
Press the [AUD] knob.
4 Set the Demonstration mode
Turn the [AUD] knob to select “DEMO”.
Press the [AUD] knob for at least 2 seconds.
Select the “DEMO OFF” display.
5 Exit Function Control mode
Press the [ ] button for at least 1 second.
⁄
• These settings can be changed later.