Kenwood KDV-415U DVD Player User Manual


 
40
|
KDV-415U/ KDV-MP5042U
Troubleshooting Guide
The messages shown below display your
systems condition.
TOC ERR: • The disc is quite dirty. The disc is upside-
down. The disc is scratched a lot.
• No disc has been loaded in the disc
magazine.
E-05: The disc is unreadable.
E-77: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the
“E-77” code does not disappear, consult
your nearest service center.
E-99: Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press
the reset button on the unit. If the “E-99”
code does not disappear, consult your
nearest service center.
MEC ERR: The unit is malfunctioning for some reason.
Press the [0] button on the unit. If the
error message does not disappear when
you eject the disc and insert it again,
consult your nearest service center.
IN (Blink): The DVD player section is not operating
properly.
Reinsert the disc. If the disc cannot be
ejected or the display continues to flash
even when the disc has been properly
reinserted, please switch off the power
and consult your nearest service center.
PROTECT (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
Wire or insulate the speaker cable
properly and press the reset button. If
the “PROTECT” code does not disappear,
consult your nearest service center.
NA FILE: An Audio file is played with a format that this
unit can’t support.
COPY PRO: A copy-protected file is played.
READ ERR: The file system of the connected USB device
is broken.
Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
NO DVICE: The USB device is selected as a source
although no USB device is connected.
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
NA DVICE: • An unsupported USB device is connected.
• Connection to the iPod has failed.
Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 4) for information on supported
iPods.
NO MUSIC/E-15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
USB ERR: Some trouble may have occurred to the
connected USB device.
Remove the USB device, turn off the unit,
wait for about 10 seconds, and then turn
on the unit again. If the same display is
repeated, use another USB device.
iPod ERR: Connection to the iPod has failed.
Remove the USB device and then
reconnect it.
Confirm that the software for the iPod is
the latest version.
REG ERR: The disc you wanted to play has a region
code that cannot be played with this unit.
PARK OFF: Source for displaying video is selected while
car is traveling.
Video will be displayed when the car is
stopped and the parking brake has been
engaged.
Press the [DISP] button for at least 1
second. The display of this unit can be
temporarily hidden.
READING: The unit is reading the data on the media.