Konica Minolta VIVID 910 Universal Remote User Manual


  Open as PDF
of 270
 
5)
ConnectingtheVIVIDdigitizertothecomputer
WhentheVIVIDdigitizerwillbecontrolledfromPolygonEditingTool,connecttheVIVIDdigitizertothe
computerrst,andthenstartupPolygonEditingTool.
ThersttimetheVIVIDdigitizerisconnectedtothecomputer,itisnecessaryforthecomputertorecognize
theVIVIDdigitizerasanexternaldevice.
Performoperationsaccordingtothefollowingprocedure.
n ConnectingtheVIVIDdigitizertothecomputer
Inorderfortheprotectkeytoberecognizedbythecorrespondingdriversoftware,itisnecessarytoinstallthe
driversoftwareonthecomputerbeforeconnectingtheprotectkeytothecomputer.
Operating Procedure
1
Turn the POWER switch of the comput-
er OFF.
2
Connect the VIVID digitizer to the com-
puter.
Memo
FordetailsonhowtoconnecttheVIVIDdigitizertothe
computer,refertotheinstructionmanualofeachmodel
oftheVIVIDdigitizer.
3
Set the POWER switch of the VIVID
digitizer to ON (set switch to “I” mark).
Initializing of the digitizer will start.
4
After MENU appears in the finder of
the digitizer, switch on the computer to
start the Windows operating system.
Note
The POWER switch of the digitizer should be set to ON
rst before switching on the computer.
Chapter
1
Preparations
13
0/7%2
!#).
3#3)
 previous next