Filter
Top Products
27
Auto shutdown setting
If no operations have been performed for the length of time you specify here, the shutdown
screen will appear automatically, and the power will turn off several seconds after that.
This will prevent the battery from running down in the event you forget to turn off the
power.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to se-
lect and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select and confirm "AutoShutDown."
The selection icon will change from "
" to " ", and the setting will be highlighted.
3. Turn the P-dial to specify the time until when the power will turn off.
If this is set "OFF" the power will stay on; Auto shutdown will not occur.
Push
Push
Push
4. Press the P-dial (or the menu button) to complete the Auto shutdown setting.
The selection icon will change from " " to " ".
LED setting
Normally, the recording LED will light while recording, but you can reduce the power con-
sumption even further by turning this LED function off.
1. Press the menu button, and in the menu list (MENU) screen, use the P-dial to se-
lect and confirm "SYSTEM."
The system setting (SYSTEM) screen will appear.
2. Use the P-dial to select "LED."
The selection icon will change from "
" to " ", and the setting will be highlighted.
3. Turn the P-dial to select "OFF."
To turn the LED back on again, perform the same operation to select "ON."
Push
Push
Push
4. Press the P-dial (or the menu button) to complete the LED setting.
The selection icon will change from " " to " ".
Text2_E.p65 06.11.22, 1:23 PM27