Filter
Top Products
49
Nothing happens when you press a button
• In some cases, the buttons may be less responsive while the recording is operating, such as
during playback or recording.
→ Hold down the button until the action occurs.
USB
Your computer does not detect the MR-1000
• Is the USB cable connected correctly? (→p.42)
→ Re-connect the cable..
Can't release the MR-1000 from your computer
• The procedure will depend on the operating system of your computer. (→p.42)
When you connect the MR-1000, you are asked to install software or a device driver
• Does the MR-1000 support the version of the operating system your computer is running?
(→p.42)
Various messages
The message dialog box will disappear when you press the P-dial.
Execution messages
Completed
• The operation has been successfully completed.
Working...
• The operation is being carried out. Please wait until this message disappears.
Error messages
Cannot execute.
• This operation cannot be performed at this time.
Can not execute Load System. Use AC Adaptor, Please.
• The AC adaptor is not connected, so the system load operation cannot be executed.
→ Connect the AC adaptor, and then load the system
Check Sum Error.
• The system could not be loaded.
→ Try the operation once again from the beginning. If this message appears again, please
contact customer service.
Text4_E.p65 06.11.22, 1:24 PM49