Filter
Top Products
2-7
Installation
54-0196 Rev. A
14. Place the radome onto the baseplate (labels facing
the sides of the vehicle) and secure in place using
the 8 pan head screws and flat washers removed
in Step 9.
15. Drill the cable access hole (marked in Step 4) in the
vehicle’s roof.
Forward
Shipping Restraint
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
Figure 2-10
TracVision S2 Shipping Restraints
(Storage Position)
Installation Bolt and Washer
Rotating Plate Shipping Restraint (1 of 2)
Figure 2-9
Rotating Plate Shipping
Restraint Storage