Filter
Top Products
3 Using Your TracVision S2
For TracVision S2 to receive the satellite signals, the antenna must
have a clear line of sight to the satellite. If you only receive
intermittent signals or the antenna cannot find the satellite, check
around your vehicle for any objects that could be blocking the
signal, such as trees, buildings, etc.
You must also be located within the selected satellite’s coverage
area in order to receive its signal. Refer to your satellite television
service manual to check the viable coverage area. For your
convenience, KVH provides links to several web sites that offer satellite
coverage information. Simply go to our web site at: www.kvh.com/
footprint/index.html.
3.1 Turning On the System
The TracVision S2 system is easy to use. To turn on the
TracVision S2 system, follow the steps below.
1. Park your vehicle.
2. Turn on the IRD and the television. (Refer to your
IRD user manual for complete operating
instructions for the IRD.)
3. Press the switchplate’s POWER button, as pictured
in Figure 3-2 on the following page.
3-1
Using Your TracVision S2
54-0196 Rev. A
Figure 3-1
Be Aware of Objects that Might
Block the Satellite Signals