Filter
Top Products
Getting Started
Lexicon
24
For the component output, the following output resolutions are
available: 1080i, 720p, 480p/576p and 480i/576i. Please refer to
the specification of your TV to find the best resolution to use.
Press the UP/DOWN ARROW buttons to select the desired output
resolution, then press the ENTER button. The player will apply the
selected output resolution and ask you to confirm the selection.
If your TV supports the selected resolution, you will see a dialog
box with a countdown clock. Use the LEFT ARROW button to
highlight the “OK” option and press the ENTER button to save
the resolution setting. If your TV does not support the selected
resolution, you may see a black screen or an error message. In
this case please wait for 15 seconds and the Easy Setup screen will
reappear. Select a different resolution that your TV can support.
Note
• In case you are not able to get a picture using the HDMI or
component output, please connect the player to the TV using the
composite video output, and then use the Setup Menu to adjust
the player settings.
• Video up-conversion over the component output is only available
for unencrypted discs such as home video and consumer-created
contents. Most commercially pressed DVD discs are CSS-encrypted
and will be limited to 480i/480p resolution. This restriction
applies to the component output only. The HDMI output is
protected with HDCP and has no such restriction.
Determine the Display Aspect Ratio
The aspect ratio is the proportional ratio of a TV screen’s width
and height. Older television sets generally have a 4:3 aspect ratio
– the width is 4/3 (or 1.33) times the height. Newer wide screen
television sets have a 16:9 aspect ratio – the width is 16/9 (or
1.78) times the height. For best performance, the video output
of your player needs to match the screen aspect ratio of your TV.
Since almost all Blu-ray Discs and many DVD discs are released in
the wide screen format, it is highly recommended that you use a
wide screen TV with the player.
The Aspect Ratio selections are 4:3 Letterbox, 4:3 Pan & Scan,
16:9 Wide, and 16:9 Wide/Auto. Depending on your selection
and the video format recorded on the discs, image appearance on
the TV screen can be one of the following:
Easy Setup
Previous Next
Step: 3/6
Choose the output resolution which best matches
your TV.
Chang
e
15 sec
o
rollbac
k
720p
Auto
480p/576p
480i/576i
Source Direct
1080i
1080p
Confirm Output Resolution
The output resolution has been changed.
Select OK to save the new setting. Select
Cancel to rollback to the previous output
resolution.
15s
Standard Definition, or 4:3 TV Wide Screen, or 16:9 TV