Filter
Top Products
Lexicon
50
The Setup Menu of the Lexicon Blu-ray Disc Player presents
many setup and configuration options. For most users, the
default configuration will be sufficient and will not require any
changes to the settings. However, if you need to configure the
player to perfectly match your home theater settings and viewing
preferences, please refer to the following sections for details about
each configuration option.
Using the Setup Menu System
In many places of this guide, the player’s Setup Menu needs to
be adjusted to match your specific audio/video configuration.
When performing menu adjustments, we will use the following
terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection
Setup Menu Section is the uppermost Setup Menu level. With the
Lexicon BD-30 there are six (6) Setup Menu sections listed in the
left column of the Setup Menu screen. They are: Playback Setup,
Video Setup, Audio Format Setup, Audio Processing, Device
Setup, and Network Setup.
Menu Item is the parameter to be adjusted which appears in
the center column of the Setup Menu. Once you enter a Setup
Menu Section, the list of Menu Items and their current value are
displayed in a box.
Selection is the actual numeric or descriptive element that
represents the change being made to the selected parameter. It is
the item located to the right of its corresponding Menu Item.
A Scroll Icon appears at the top or bottom of the menu when
there are more Menu Items or Selections than what can fit in a
screen. You may use the UP and DOWN ARROW buttons to scroll
the display in order to access additional items.
The preceding diagram should give a good description of the
various elements and their context. In this screen we could, for
example, instruct you to set the PIP Mark parameter to Off in the
Playback Setup section. To indicate where we were, you would
see the following: Playback Setup > PIP Mark > Off.
Note
It is possible that some setup items are grayed-out and inaccessible.
This can be caused by disc still being played back or interlocking with
mutually exclusive setup items. Please stop playback or eject the disc
before trying to change these setup items. If you still cannot access the
setup item, please check for configuration conflicts and consistency.
For example, if “Video Setup > 1080p24 Output” is set to “Off”,
the “DVD 24p Conversion” menu item will be grayed-out.
Setting “1080p24 Output” to “On” will enable the “DVD 24p
Conversion” setting.
To access the player’s Setup Menu, simply press the SETUP
button on the remote control. Since some Setup Menu options
can become inaccessible when the player is playing a disc, it is
Setup Menu Options
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
On
Off
Setup Menu
Exit
The PIP mark will not appear
Setup Menu Section
Navigation Cue Help Hint Scroll Mark
SelectionCurrent ValueMenu Item