Filter
Top Products
Lexicon
68
Setup Menu Options
Device Setup
The “Device Setup” section of the Setup Menu system allows you
to configure additional player options related to the hardware and
control functions. The menu items in this section are:
1. Dimmer Control: To control the display intensity of the front
panel Vacuum Fluorescent Display (VFD) information window.
In case you feel that the display becomes a distraction to your
enjoyment of the video, this option allows you to dim it or
turn it off. The available options are:
• On – The VFD window is at normal brightness.
• Dim – The VFD window is at reduced brightness.
• Off – The VFD window is turned off. In this mode the
display resumes momentarily when there is any user
operation.
2. OSD Mode: To select how long the on-screen display
information, such as elapsed or remaining time, stays on the
TV screen. The available options are:
• Normal – On-screen display information stays on the TV
screen until the user cancels it.
• Silent – On-screen display information shows on the
TV screen for a few seconds and then disappears. The
front panel display still maintains the selected display
information.
3. Remote Control Code: The Lexicon BD-30 Blu-ray Disc Player
can respond to one of 4 sets of remote control codes. The
default is “Code 1”. If you have other products placed close
to the BD-30, the other products may respond to the BD-30
that are causing interference, you can select a different remote
code to avoid conflicts.
If you have selected a new remote code, you must set the
remote control handset to use the same code. Please refer
to the Setting the Remote Code section on page 12 of this
manual for details. If you have selected “Alt. Code”, the
supplied handset will not operate the player, and you must
use a universal remote control with the properly configured
code set.
4. HDMI CEC: To set HDMI Consumer Electronics Control
(CEC) mode. CEC is an optional HDMI feature that enables
convenient remote control and automatic setup of consumer
electronics over the HDMI connection. The remote control
function allows you to use a single remote handset to operate
multiple devices connected via HDMI. For example, you may
use the TV remote to control playback of the Blu-ray Disc
Player. The automatic setup function can automatically turn on
the TV and change to the proper input when you start playing
a disc in the Blu-ray Disc Player. It can also turn off the player
automatically when you turn off the TV. The implementation
and compatibility of this feature varies by device manufacturer.
Each may only implement part of the features or add their
own proprietary functions. The manufacturer-specific
implementation of the HDMI CEC function is often given a
proprietary name of “…Link” or “…Sync”. The Lexicon BD-30
Blu-ray Disc Player provides three modes for the HDMI
CEC function:
• On – HDMI CEC is enabled. Use this mode if your other
devices are compatible with the player.
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Dimmer Control
OSD Mode
Remote Control Code
HDMI CEC
Persistent Storage
Reset Factory Defaults
Firmware Information
On
Normal
Code 1
On
Setup Menu
Exit
Dim front panel display