Filter
Top Products
BD-30 Blu-ray Disc Player
53
Setup Menu Options
password. Enter the new password again to confirm.
If the two entries are matching, the new password
replaces the old parental control password.
3. Angle Mark (on/off): To turn on/off the display of an angle
mark when a DVD or Blu-ray Disc with multiple available
angles is played. Keeping the angle mark off avoids distraction
from normal movie watching.
4. PIP Mark (on/off): To turn on/off the display of a Picture-
in-Picture mark when a Blu-ray Disc with secondary video
is played. Keeping the PIP mark off avoids distraction from
normal movie watching.
5. SAP Mark (on/off): To turn on/off the display of a Secondary
Audio Program mark when a Blu-ray Disc with secondary
video and audio is played. Keeping the SAP mark off avoids
distraction from normal movie watching.
6 SACD Priority: To select which audio layer to play for SACD
(Super Audio CD). The options are:
• Multi-Channel – Play the multi-channel surround
audio layer
• Stereo – Play the 2-channel stereo audio layer
• CD Mode – Play the CD layer of a hybrid SACD disc
7. Auto Play Mode (on/off): To select whether the player shall
start playing an audio CD or SACD automatically. When
auto play mode is turn on, these discs will start playing upon
insertion into the player. When auto play mode is turned off,
the player will wait for the user to start playback by pressing
the PLAY button.
8. PBC – Play Back Control: To enable/disable Play Back
Control. Play Back Control is a primitive form of disc menu.
The options are:
• On – If the disc contains Play Back Control, show
the menu.
• Off – Play back the contents by sequence.
Video Setup
The “Video Setup” section of the Setup Menu system allows you
to configure video output options. The menu items in this section
are:
1. Picture Adjustment: To adjust picture control parameters.
The Lexicon BD-30 Blu-ray Disc Player provides a wide array of
picture controls. Please refer to the Picture Adjustment section
on page 57 of this manual for details of each control.
2. Primary Output: To select the primary video output port. The
options are:
• HDMI – Use HDMI as the primary video output port.
This setting will ensure that the HDMI output gets the
best possible picture quality. The VRS video processor
will be used unless “Source Direct” output resolution is
selected, in which case VRS video processing is bypassed.
Component and composite video output may not be
available or may be limited to a lower resolution based on
content source limitations.
• Component – Use component video as the primary video
output port. This setting will ensure that the component
output will always be available and displays proper video
signals. With this configuration, the video decoder in the
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Picture Adjustment
Primary Output
TV Aspect Ratio
TV System
Output Resolution
1080p24 Output
DVD 24p Conversion
HDMI
16:9 Wide
NTSC
Auto
Off
Off
Setup Menu
Exit
Adjust picture control parameters