Filter
Top Products
12
2. Video Output Selection
This screen will prompt you to select the video output you will be
using. Please select the same cable type that you used to connect
your player to your TV. If you are uncertain of which cable you
connected, the pictures will act as a rough guide.
3. Display Format Selection
This screen will prompt you to select the format of the TV
connected to your player. The selections are: 16:9 widescreen,
or conventional 4:3 format. If you are not what your television is,
select the picture that is closest match.
4. Selecting the Network
After you have connected an Ethernet cable to your KiSS 1600 or
are ready to set up your network, either select WIRED NETWORK
(for ethernet cable connection), WIRELESS NETWORK, or NO
NETWORK if you are not yet ready to connect your player.
- If you have selected WIRED NETWORK, proceed to item 5a.
- If you have selected WIRELESS NETWORK, proceed to item 5b.
- If you have selected NO NETWORK, the Quick Setup is
now finished.
5a. Selecting the Network WIRED NETWORK
After selecting WIRED NETWORK, the player will take a few
seconds to look for your network configuration. When found, a
message will appear with the details of your configuration, Select
USE THIS if you are satisfied, or CONFIGURE MANUALLY if you
are an advanced user and you would like to enter the settings
yourself. If you have selected USE THIS, the Quick Setup is now
finished, and you can start using your KiSS 1600. If you have
selected CONFIGURE MANUALLY, you will be prompted to enter
After powering up your player for the first time, the Quick Setup
will be displayed so that you can perform the basic setup of
your player. The Quick Setup is simple and largely self-explana-
tory. Should you wish to go through it again or alter some more
advanced settings later, please consult the ADVANCED SETUP
section of this User Guide.
1. Language Selection
This first screen will tell you to select the language you wish
to use on your DVD Player. Use the directional buttons on your
remote control to navigate, and press the OK button to select
a language.
6 Quick Setup
Powering up the Player
Connect your KiSS 1600 to the mains power outlet to
start it.
Wait up to 20 seconds for the KiSS 1600 to start
loading. The message “PLS WAIT” appears. Wait
another 20 seconds for loading to complete. The fi rst
screen of the Quick Setup will appear:
QuickSetup
Language
English
Dansk
Deutsch
Español
Please select your preferred language.
QuickSetup
Video Output
Please select the cable type you have used to connect your
player to your TV.
SCART RGB Help
Composite Video
S-Video
SCART RGB
Component SD
QuickSetup
Display Format
Please select the format of your Display
16:9 Automatic
4:3 Letterbox
4:3 Pan & Scan
QuickSetup
Network Type
Please select the type of network you wish to use with your
player. For wired network, please make sure that your player
is properly connected first.
No Network
Wired Network
Wireless Network
QuickSetup
Network Configuration Found
Please select the type of network you wish to use with
your player. For wired network, please make sure that
your player is properly connected first.
IP address 64 103 54 187
Use This Configure Manually
EN