Linksys KiSS 1600 DVD Player User Manual


 
13
your configuration details using the numeric keypad on the
remote control. After you have done this, the Quick Setup is now
finished.
5b. Selecting the Network (Wireless Networks)
Provided you have a wireless network setup at home, you can
select WIRELESS NETWORK. The player will take a few seconds
to look for the available wireless networks. When found, the list
of available wireless networks will appear on your television
screen. Select the name of the network that you wish to use.
If your network is not encrypted (No encryption key needed to
access it), just select its name from the list. Note that a small
icon (a lock next to the network name) will show you whether or
not the network is encrypted. The player will take a few seconds
to look for your network configuration. When found, a message
will appear with the details of your configuration, Select USE
THIS if you are satisfied, or CONFIGURE MANUALLY if you are an
advanced user and you would like to enter the settings yourself.
If you have selected USE THIS, the Quick Setup is now finished,
and you can start using your KiSS 1600. If you have selected
CONFIGURE MANUALLY, you will be prompted to enter your
configuration details using the numeric keypad on the remote
control. After you have done this, the Quick Setup is finished. If
your network is encrypted, please go to step 6.
6. Setting the Wireless Network Encryption Key
If your network is encrypted, select its name from the list. A
window will pop up asking to provide the network encryption
details. Select WIRELESS ENCRYPTION, and then select the
type of encryption that is used on your wireless network: WEP,
WPA/PSK TKIP (Personal) or WPA/PSK AES (Enterprise). If your
network is set as WPA2, please use WPA/PSK AES. If you are not
sure of which type of encryption you are using, please check your
wireless router settings on your computer. After you have selected
the wireless encryption, go to ENCRYPTION KEY. A keypad will
appear on your screen, simply use it to write your wireless
encryption key. This encryption key is the same one that you are
using to connect to your wireless network. Press OK when you
are finished. It will take a few seconds for the player to connect
to your wireless network. When this has been done, a message
will appear with the details of your configuration, Select USE
THIS if you are satisfied, or CONFIGURE MANUALLY if you are an
advanced user and you would like to enter the settings yourself.
If you have selected USE THIS, the Quick Setup is now finished,
and you can start using your KiSS 1600. If you have selected
CONFIGURE MANUALLY, you will be prompted to enter your
configuration details using the numeric keypad on the remote
control. After you have done this, the Quick Setup is finished.
7. Wireless Network Encryption with PassPhrase
If you are using WEP and a PASSPHRASE to connect to your
wireless network, just select WEP from the list of Wireless
Encryption. You do not need to write an encryption key, so press
OK. The menu will take you out of the Quick Setup. Press SETUP
on your remote and go to the NETWORK SETTINGS Menu. Select
LINKSYS WIRELESS PASS PHRASE, then select the type of key
that you have set: 64-bit or 128-bit. After you have selected the
key type, go to WIRELESS PASSPHRASE. A keypad will appear
on your screen; simply use it to write your PassPhrase. Press OK
when you are finished. A list of 4 Passphrases will be displayed on
your screen, select the one that matches your wireless computer
settings, then press OK. If you are not sure of your Passphrase
and Passphrase Keys, please check your wireless router settings
on your computer.
If you experience a problem connecting, check the FAQ on our
website (www.linksys.eu; select your country, then Support,
Technical Support and Easy Answers).
Congratulations!
You have successfully set up your player!
EN