Filter
Top Products
17
ADJUSTING THE MANUAL CONVERGE CONTROLS
Adjusting the Manual Converge Controls
CONVERGE RED/BLUE
C
onvergence is the correct lining up of the red and blue
light paths on the TV screen. If the paths don’t line up,
color fringes will appear around objects on screen. If no
color fringes show, then no convergence adjustments are
necessary. NOTE: Allow the TV to warm up 20 minutes
before adjusting convergence. See the chart to the right for
guidance as to which convergence controls to use.
1
Press the MENU button. The menu appears.
Press the CURSOR BUTTON RIGHT to enter
the PICTURE submenu. Then press the CURSOR
BUTTON DOWN until MANUAL CONVERGE
is highlighted.
2
Press the CURSOR BUTTON RIGHT to enter
the MANUAL CONVERGE submenu. If you
want to adjust the Red Convergence, press the
CURSOR BUTTON RIGHT to enter the adjust
mode. If you want to adjust the Blue Convergence,
press the CURSOR BUTTON DOWN to highlight
CONVERGE BLUE, then press the CURSOR
BUTTON RIGHT to enter adjust mode.
3
In adjust mode, press the CURSOR
BUTTON RIGHT, LEFT, UP, or DOWN
to adjust the cross hair until the color outline
around it is gone. (The adjustment is automati-
cally saved in the TV’s memory.) To return to the
MANUAL CONVERGE menu, press the MENU
button. To exit the onscreen display, press the
EXIT/INFO button.
neercS
ecnaraepp oitcA
suoiraV
segami
tuohguorht
eritneeht
evaherutcip
.seniltuoder
ehttsujdA
EGREVNOC
.lortnocDER
derynafinehT
,niamerseniltuo
ehttsujda
TNIOPITLUM
.lortnocDER
suoiraV
segami
tuohguorht
eritneeht
evaherutcip
.seniltuoeulb
ehttsujdA
EGREVNOC
.lortnocEULB
eulbynafinehT
,niamerseniltuo
ehttsujda
TNIOPITLUM
.lortnocEULB
A n