Filter
Top Products
SOUND MENU CONTROLS
Using the Sound Menu Control
T
o adjust your TV sound, select and use the Sound
Menu Controls listed below:
1
Treble: Press the CURSOR ˙ or ˝buttons to
adjust the control. The control will enhance the
high frequency sounds.
2
Bass: Press the CURSOR ˙ or ˝buttons to
adjust the control. The control will enhance the
low frequency sounds.
3
Balance: Press the CURSOR ˙ or ˝buttons
to adjust the level of sound coming from the left
and right speakers.
4
AVL: (Auto Volume Leveler) Press the CURSOR
˙ or ˝buttons to turn the control On or Off.
When On, AVL will level out the sound being
heard when sudden changes in volume occur
during commercial breaks or channel changes.
5
Incr. Surround: Press the CURSOR ˙ or ˝
buttons to select between Dolby Virtual or Stereo
settings (If Stereo), or select Spatial or Mono (If
Mono).
6
SAP: Press the CURSOR ˙ or ˝buttons to
toggle this control to On or Off. SAP is short
for Secondary Audio Programming and is sent as a
third audio channel, a SAP signal can be heard
apart from the current TV program sound.Note: If
SAP is not present on a selected show No SAP
will appear on the screen.
7
Stereo: Press the CURSOR ˙ or ˝buttons to
select between Stereo or Mono settings. Note: If
Stereo is not present on a selected show and the
TV is placed in the Stereo mode, the sound coming
from the TV will remain in the Mono mode.
8
Alt Audio Program: Press the CURSOR ˙
to select the appropriate language.
9
Bass Boost: Press the CURSOR ˙ or˝buttons
to toggle this control to On or Off. The Bass Boost
control allows you to increase the low-frequency
range of the TV’s sound. This creates a deeper, fuller
sound.
To switch between Digital and Analog channels, use
the A/D button on the Remote Control.
HELPFUL HINT
19
* Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol £ are trademarks of Dolby Laboratories.