Filter
Top Products
23
BLOCK CHANNELS PART 2
Using the Features Menu
A
fter your personal access code has been set
(see previous page), you are now ready to
select the channels you want to block out or censor.
Once you’ve entered your access code and the
AutoLock™ features are displayed on the screen:
1
Press the CURSOR UP v or DOWN wbut
tons until the words Block Channel are high
lighted.
2
For digital mode:
Press the CURSOR RIGHT ubutton to enter
the Channel Blocking menu. Press OK to lock or
unlock the channel.
For analog mode:
Press the CURSOR RIGHT ubutton to block
the channel. A padlock symbol will appear on the
right of the channel number. If you decide not to
block the channel, press the CURSOR RIGHT
ubutton again to remove the block
(The padlock symbol disappears).
3
Repeat steps 1-2 to block another channel.
4
When finished, press the EXIT/INFO button
to remove the menu from the screen.
NOTE: If you ever forget your code, the 0, 7, 1, 1 code
is the factory default and can be used to enter and create
a new access code. Enter the above number twice.
Use the A/D button on the Remote Control to switch
between Digital and Analog channels.
HELPFUL HINT