Filter
Top Products
20
BConnecting the DVD recorder
Preparing the remote control for
operation
The remote control and its batteries are packed separately in the original DVD recorder
packaging. You must install the batteries in the remote control before use.
1
Take the remote control and the enclosed batteries (2 AA
batteries).
2
Remove the battery compartment lid, insert the batteries as
shown, then replace the battery compartment lid. Always install
the +/- ends of the batteries as indicated inside the battery
compartment.
The remote control is now ready to use.
Its range is approximately 16-32 feet (5 to 10 meters).
Aim correctly
In the following sections, you require the remote control for the first
time. When using, always aim the front of the remote control at the
DVD recorder, and not at the TV.
Tip
Connecting your DVD recorder to the TV
The necessary cable connections must be made before you can record or playback TV programs
using your DVD recorder.
Connect the DVD recorder directly to the TV. Connecting a video cassette recorder between
the DVD recorder and the TV could result in poor picture quality because of the copy
protection system built into the DVD recorder.
Connecting the DVD recorder