Filter
Top Products
69
Programming a recording
(without VCR Plus+
®
system)
1
Switch on the TV. If required, select the channel number for the
DVD recorder (channel 3 or 4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER on the remote control.
Timer
Timer Programming
Date
01/22
Ch.
01
Start
08:30AM
End
10:00PM
Rec
Mode
HQ
Mo-Fr/Weekly
Press SELECT
To store
Press OK
3
Select 'Timer Programming' using B or A and confirm with
C .
The information will appear on the screen.
4
Select an item (date, channel, start, end, or Rec mode) with
D or C .
5
Enter information with B or A or with the number buttons
0..9 .
6
For 'Date', enter the month and then the date.
Selecting daily/weekly recordings
While date is selected, use SELECT to choose from the following
options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mo': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Program numbers of the 'EXT1' and 'EXT2' cinch socket
You can also program recordings from external sources via EXT 1 TO
TV-I/O ('EXT1') or EXT 2 AUX I/O ('EXT2').
Changing recording mode in the 'Rec Mode' input field
Select the 'Rec Mode' input field using C .
Using B , A select the recording mode 'HQ, SP+, EP, EP+'.
Tip
7
If all information is correct, press the OK button. The
information is stored in a TIMER block.
8
To end, press TIMER .
9
Insert a recordable disc in the Recorder.
The disc is checked.
10
Switch the Recorder off with STANDBY m .
The programmed recording will only function properly when the
DVD recorder has been switched off using the
STANDBY m button.
If any of the TIMER blocks are in use, 's' will light up on the display.
ENGLISH
Programming a recording (TIMER)