Magnavox MDV630R DVD Recorder User Manual


 
31
InitialSetup
SubtitleLanguage
English
Español
Français
Português
Italiano
Press OKtocontinue
5
Select the desired language for the subtitles by pressing B or
A .
What is the language of the subtitles?
DVD subtitles will be in the selected language if it is available. If this
language is not available, subtitles will be in the first language on the
DVD.
?
6
Confirm by pressing OK .
InitialSetup
TV Shape
4:3 letterbox
4:3 panscan
16:9
Press OKtocontinue
7
Select the desired screen format with B or A . This setting
only functions if you have inserted a DVD recorded in this
format.
Which screen formats can I choose?
4:3 letterbox for a wide-screen display (theatrical format)with black
bars at the top and bottom of the picture.
4:3 panscan for a full-height picture with the sides trimmed to fill you
TV screen.
16:9 for wide-screen TV (16:9) aspect ratio
?
8
Confirm by pressing OK .
After you connect the antenna (or cable TV signal, satellite
receiver, etc.) to the DVD recorder, press OK
Make sure the Cable TV signal is connected securely to the
Antenna jack on the rear of the DVD Recorder.
The automatic TV channel search starts. 'WAIT' will appear on the
display.
Installation
Auto Ch.Programming
Searching for TV channels
000 Channels found
Please wait
aDuring the channel search, if the DVD recorder does not find
any TV channels:
b Select another channel on the TV. Do you see that channel on the TV
set?
If not, check the connections between the DVD recorder and the TV.
b Please have patience.
The DVD recorder searches the entire frequency range in order to
find and save the largest possible number of TV channels. It is possible
that the TV channels in your country are broadcast in a higher
frequency range. As soon as this range is reached during the search,
the DVD recorder will find the TV channels.
b If no antenna is connected, complete the basic settings and then, if
desired, start the automatic channel search (see section 'Automatic TV
channel search').
aThe DVD recorder finds very few/no channels during the
search.
b It is possible that the automatic switching between antenna/cable does
not properly detect your TV signal. Read the section about how to
switch manually.
Problem
ENGLISH
Installing your DVD recorder