Filter
Top Products
27
CConnecting additional devices
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the
IN S-VIDEO (Y/C) , IN VIDEO (CVBS) , IN COMPONENT VIDEO jacks on the recorder.
You will also use the AUDIO IN jacks of the Recorder for connecting to other devices.
Can I also connect devices with 'Progressive scan'?
The IN COMPONENT VIDEO jacks are only used for 'interlaced'
signals. Signals using progressive scan cannot be processed by the DVD
recorder.
?
Connecting an additional video recorder
You can also connect a video recorder to the input jack. Please use the IN S-VIDEO (Y/C) jack
and the IN L AUDIO R jacks for SVHS video recorders.
Please be aware
Most pre-recorded video cassettes and DVDs are copy protected. When you attempt to copy
them, the 'COPY PROT' message will appear in the DVD recorder display.
aWhen copying video cassettes 'NO SIGNAL' appears in the
DVD recorder display
b Check to make sure that the scart cable is inserted properly.
b If the recording is made from a video recorder, adjust the "tracking"
on the video recorder.
b The DVD recorder may sometimes not recognize video input signals
that are poor or non-standard.
aWhen copying from DVDs or precopied video cassettes, the
picture is grainy and the brightness fluctuates.
b This occurs when you attempt to copy copy-protected DVDs or
video cassettes. Although the picture on the TV is OK, the recording
is distorted on a DVD+R(W). Copy-protected DVDs and video
cassettes cannot be copied without these disruptions.
Problem
ENGLISH
Connecting additional devices