Magnavox MDV 530 VR DVD VCR Combo User Manual


 
Hookups (contd) 13
DVD/VCR to a TV that has an S-Video In jack
COAXIAL
S-VIDEO
OUT
DIGITAL
AUDIO OUT
AUDIO
OUT
COMPONENT
VIDEO OUT
L
Y
R
CB
CR
DVD
AUDIO OUT
VIDEO OUT
AUDIO IN
VIDEO IN
L
R
L
R
DVD/VCR VCR
ANT-IN
ANT-OUT
AUDIO IN
LEFT
RIGHT
S-VIDEO IN
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
2
Connect the supplied red and white audio cables to the red and
white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the
red and white AUDIO IN jacks on the TV. Match the cable colors to the
jack colors.
3
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack
on the DVD/VCR and to the S-VIDEO IN jack on the TV.
The S-Video connection only supplies video (picture) for the DVD Player of the
DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the
DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-
OUT jack of the DVD/VCR and the TVs Antenna In jack, or connect the yellow video
cable. To connect the supplied RF coaxial cable, see step 2 on page eight. To con-
nect the supplied yellow video cable, see step 3 on page 11.
4
Connect the power cords of the DVD/VCR and TV to a power out-
let. Turn on the TV and set it to the S-Video In channel for DVD
Player features.
If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4
at the TV. If you are using the yellow video cable for VCR playback, choose
the Video In channel at your TV. To find the correct Video In channel, go to
your lowest TV channel and change channels downward until you see VCR or
DVD playback on the TV screen, or try channel 3 or 4 at the TV.
To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD
to put the DVD/VCR in DVD mode. With no Disc in the Player, a large DVD
Video logo will appear on the TV screen when you get the TV on the S-Video In
channel.
5
You are ready to turn on the DVD/VCR. Go to page 17 before turn-
ing on the DVD/VCR.
6
After you complete the VCR setup as described on page 17, set
DOLBY DIGITAL to OFF in the DVD Players Setup menu. Details
are on page 68. If you play a DVD when the settings are wrong, the sound will
be distorted or you may damage the TV speakers.
3
2
Antenna/Cable
TV Signal
1