Magnavox MDV 530 VR DVD VCR Combo User Manual


 
Multi-Channel Television Sound 45
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14.
You will use the red and white AUDIO OUT jacks on the DVD/VCR.
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels. Your DVD/VCR also can play tapes recorded in a second audio
(usually, that means your program is recorded in a second language). Of course, your DVD/VCR will play
tapes recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record a video cassette in Hi-Fi stereo or in second audio, so when you play that
tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then fol-
low the directions on page 46 to record in stereo or second audio, or follow the directions on page 47 to
play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear
when you press DISPLAY twice.
If SAP or STEREO appears, the program is available in second audio or stereo.
Even though a program is available in second audio or stereo, you must pro-
gram the DVD/VCR to receive or record the program. Follow the directions on
page 46.
This display is not available during tape playback.
STOP 12:00 AM
CH 02
STEREO
SAP
SLP