Filter
Top Products
VCR Status Displays 31
You may access status displays by pressing DISPLAY. The displays
may include the current time, channel, and other information.
1
Press DISPLAY. The COUNT display will appear for five
seconds. After five seconds, only the real-time tape
counter will appear. This counter shows you the elapsed
playing time of the tape (from the point at which the
counter was set to zero). The counter also will appear on
the display panel on the front of the DVD/VCR.
2
Press DISPLAY again. The CLOCK display will appear
for five seconds. After five seconds, only the time will
appear (the clock must be set). (If you are watching TV,
the channel number and the availability of stereo or second
audio will also appear.) The time also will appear on the
display panel on the front of the DVD/VCR.
3
Press DISPLAY again to remove all the displays.
• If the channel you select has no
broadcast, the screen will be
solid blue.
• You cannot access a status dis-
play when viewing a still picture,
during slow motion, or during
forward and reverse searching.
• Channel numbers appear on the
screen for a few seconds each
time you change channels.
Helpful Hints
STOP
SLP 0:12:34 HIFI
STOP 5:40 PM
CH 02
STEREO
SAP
SLP
STANDBY-ON
TIMER SET
SLOW
VCR/TV
ZOOM
DISPLAY
3
456
789
SPEED
0
+10
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE RETURNMODE
C-RESET
A-B
AUDIO ANGLESUBTITLE
REC
REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH
SEARCH MODE
1-3