Filter
Top Products
Cancelling Timer Recordings
1
Press VCR, then press DISC/MENU.
2
Press o or p to select TIMER PROGRAMMING,
then press B.
3
Press o or p to find the program you want to
cancel.
4
While the program number is flashing, press s to
clear all the information for that program.
5
Press C-RESET/CLEAR to remove the menu.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 SUN
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
38 Timer Recording (cont’d)
9
Press o or p to select a recording tape speed. The
arrow will appear beside your choice. The selected speed
will flash beside REC SPEED. Details about tape speed are on
page 72.
10
Press C-RESET/CLEAR to store the timer recording.
11
Press TIMER SET. The DVD/VCR will turn off and the
red TIMER REC light will appear on the front of the
DVD/VCR. In some cases, the DVD/VCR will switch to
DVD mode instead. You may use the DVD Player during
a timer recording.
If you want to use the VCR until time for the recording,
don’t press TIMER SET until a few minutes before the
recording should start. Or, press TIMER SET only when
you know you won’t be using the VCR anymore (until
after the recording). When the TIMER REC light is on,
you cannot put the DVD/VCR in VCR mode by pressing
VCR or OUTPUT. You must first press TIMER SET to
cancel the timer recording temporarily. Then, you can
use the VCR features again.
ONE TIME PROGRAM
PROGRAM NUMBER
1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL
1 6
REC SPEED S P
B SP
SLP
• If you are recording from other
equipment, set CHANNEL to L1
or L2. If you connected the other
equipment to the AUDIO and
VIDEO In jacks on the front of the
DVD/VCR, choose L2. If you con-
nected the audio and video cables
to the AUDIO IN and VIDEO IN
jacks on the back of the
DVD/VCR, choose L1.
• To change incorrect information,
press
s
or
B
to choose the item
you want to change. Press
o
or
p
to adjust the information.
• If a timer recording is set and the
TIMER REC light is on, pressing
STOP/EJECT
C A
will turn on the
DVD/VCR and/or cancel the timer
recording. The TIMER REC light
will turn off. Press STOP/EJECT
C A
again to remove the tape.
Remember to insert a tape and
press TIMER SET to reset the
timer recording.
• If there is no tape in the VCR
when you press TIMER SET, the
TIMER REC light will flash. Insert
a tape.
Helpful Hints
9
10
11
STANDBY-ON
TIMER SET
SLOW
DISPLAY
3
456
SPEED
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE RETURNMODE
C-RESET
A-B
AUDIO ANGLESUBTITLE
REC
REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH