Filter
Top Products
3
Press o or p to select English, French, or Spanish
as the language for VCR on-screen displays and menus.
Then, press B.
First-time DVD/VCR Setup 17
4
Press B to begin channel programming. AUTO
SETUP will flash on the TV screen during the channel
search. The DVD/VCR will memorize all available channels.
When channel programming is complete, the lowest avail-
able channel will appear on the TV.
These channels will be available when you want to watch
TV while in VCR mode. To put the DVD/VCR in VCR
mode, press VCR so the green VCR light appears. Use the
SKIP i /CHo and SKIP j /CHp buttons to select
memorized channels. To select non-memorized channels,
use the Number buttons.
• To skip this feature and play a tape
immediately, insert a tape with its
record tab removed.
• To skip step 3, press DISC/MENU.
VCR menus and displays will be in
English.
• If you try to program channels
when there is no antenna or Cable
TV signal connected to the ANT-IN
jack of the DVD/VCR, programming
will stop. AUTO SET UP will stop
flashing. Connect an antenna or
Cable TV signal to the DVD/VCR’s
ANT-IN jack and press
B
again.
• Repeat this process if the power
fails.
• To stop the Channel Setup while
AUTO SET UP is flashing, press
DISC MENU.
Helpful Hints
Before turning on your DVD/VCR, make sure batteries are in the
remote control and the DVD/VCR and TV are connected correctly.
You cannot program channels if you are using a Cable Box or a
Satellite Receiver.
These menus may not appear if you have already turned
on the DVD/VCR.
1
Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel, depending on how you con-
nected the DVD/VCR to a TV.
2
Press STANDBY-ON. The green VCR light and the red
STANDBY-ON light will appear on the front of the
DVD/VCR. The display shown below will appear.
These menus may not appear if you have already turned on
the DVD/VCR. You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 26 to set up chan-
nels and page 30 to select a language for the VCR menus.
1
Turn on the TV.
AUTO SET UP
STANDBY-ON
TIMER SET
SLOW
VCR/TV
ZOOM
DISPLAY
3
456
789
SPEED
0
+10
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE RETURNMODE
C-RESET
A-B
AUDIO ANGLESUBTITLE
REC
REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH
SKIP/
CH
SEARCH MODE
2
3-4