Filter
Top Products
11EN 11EN
Recording Playback Editing
Introduction
Connections Basic Setup Function Setup Others
Español
VIDEO
IN
AUDIO IN
(
L1
)
S-VIDEO
S-VIDEO
ANTENNA
AUDIO OUT
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
IN OUT
COAXIAL
L
R
L
R
Y
P
B
/C
B
P
R
/C
R
VIDEO
OUT
IN
OUT
HDMI OUT
21
9
3 4 5
810 6712 11
Rear Panel
FUNCTIONAL OVERVIEW
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
1. ANTENNA IN jack
• Use to connect an antenna.
2. VIDEO IN jack (L1)
•
Use to connect external device with an RCA video
cable.
3. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
4. HDMI OUT jack
• Use an HDMI cable to connect to a display with an
HDMI compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder
or other device with a coaxial digital input jack with
a digital coaxial cable.
7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
8. COMPONENT VIDEO OUTPUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
10. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device
with an S-video cable.
11. AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio
cable.
12. ANTENNA OUT jack
• Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
E7S50UD_ZC357MGX_v1.indd 11E7S50UD_ZC357MGX_v1.indd 11 2008/12/01 13:56:562008/12/01 13:56:56