Magnavox ZC357MGX DVR User Manual


 
41EN 41EN
Recording
Playback Editing
Introduction
Connections Basic Setup Function Setup Others
Español
TIMER RECORDING
1
Press [TIMER].
2
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
THU JAN/01 11:00AM
Date Start End CH
New Program
• If there are 6 or more programs, use
[H / G] to change pages.
3
Use [K / L] to enter the date, then
press [B].
Date
JAN/02
Mode
SP
SP 2h00m
Start
- - : - -
End
- - : - -
CH
DTV69. 1
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
Guide to Timer Programming Display
Timer Programming
1/1
THU JAN/01 11:00AMSP (1:00)
JAN/ 2/09 12:00 AM 69.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV69. 1
New Program
1
5
3
4
2
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
Note
• If you have not set the clock yet:
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 5 in “Manual Clock Setting” on page 30
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
• You cannot make a program whose recording time
exceeds 12 hours.
E7S50UD_ZC357MGX_v1.indd 41E7S50UD_ZC357MGX_v1.indd 41 2008/12/01 13:57:532008/12/01 13:57:53