Filter
Top Products
5Playing Discs
27
English
Making a program list
This feature lets you program the play order of titles/groups/chap-
ters/tracks on a disc. You make a program list via an on-screen display,
using the cursor buttons to navigate and the number buttons to enter
titles/chapters/tracks.
Note that programmed playback is not available for DVD-RWs.
1 Press PROGRAM.
Exit
Move
Play
Current:
Title
Title
Program Memory — Off
7
1
Chapter
(Chapter 1~18)
1
Program Chapter Program Title
PROGRAMENTER
Exit
Move
Play
Current:
Title
Program Memory — Off
2(/20)
Program Chapter Program Title
PROGRAMENTER
2 Move the Joystick left/right to select ‘Program Chapter’ or ‘Program
Title’.
3 Move the Joystick down to the program list window.
If you selected Program Chapter, move the Joystick up and enter a title
number (all the programmed chapters will come from this title).
4 Enter the title/chapter numbers for your program list.
For titles/chapters 1–9, use the corresponding number buttons. For 10 and
over, use the +10 button (+10, +10, 4 for 24, etc.)
• You can program a pause instead of a title/chapter: press 8 instead of
entering a number in the program list. (A pause can't be the first or last step
in the list.)
• A program list can contain up to 24 steps.
5 If you want to save the program list, move the Joystick down to
‘Program Memory’ and set it to ‘On’.
Exit
Move
Current:
Title
Title
Program Memory On
7
1
09 07 18
Chapter
(Chapter 1~18)
1
Program Chapter Program Title
Off
PROGRAMENTER
Select
If you do this, the program list is automatically recalled when you next load
the disc.
• You can save program lists for up to 24 discs.
• After setting to On, move the cursor back up to the program list window.