Filter
Top Products
7DVD Setup Menu
45
English
Gain Settings
• Default setting: Fix
You may want to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
Under the default setting, all channels are output at
the relative volumes they were recorded at. Change the
setting to Variable if you want to adjust the relative
volume levels of any of the speakers. Adjustment is in
the range of -6dB to +6dB, in steps of 0.5dB.
• When set to Variable, the overall output level may
sound quieter than when set to Fix. This is not a
malfunction.
Note
Gain settings are not effective when playing a CD with
CD Digital Direct set to On.
—
—
Audio2
Video1
Language
General
A1
V2
Exit
Move
SETUP
Select
ENTER
Off
2 Channel
Fix
Variable
Exit
Select
Test Tone
Return
Audio2
Video1
Language
General
A1
V2
L
C
R
RS
LS
SW
Gain Setting
— 0.0 dB
— 0.0 dB
— 0.0 dB
— 0.0 dB
— 0.0 dB
— 0.0 dB
L R
SW
LS RS
SETUPENTER
Virtual Surround
Audio Out
Speaker Setting
Gain Setting
CD Digital Direct
To help you gauge the correct gain levels, set the Te s t
Tone to On (test tone from just that speaker) or Auto
(test tone from each speaker in turn, excluding the
subwoofer) then adjust the gain so that all speakers
appear to be the same volume from your listening
position.
Follow the on-screen displays to select speakers and
set the channel levels.
• You can adjust the Test Tone setting only when the
player is stopped.
• Many AV amplifiers allow you to make similar
settings at the amplifier stage. In this case, set the
channel levels at the player or the amplifier, not
both.
• As the test tone plays through a speaker, its name is
highlighted in yellow on-screen.
Exit
Select
Gain
Return
Audio2
Video1
Language
General
A1
V2
L
C
R
RS
LS
SW
Test Tone
— Off
— Off
— Off
— Off
— Off
— Off
L R
SW
LS RS
SETUPENTER
Remember
You can't use the test tone function when the Audio
Out setting is 2 Channel (see page 43).The test tone
will not work with the disc tray open, or while a disc is
playing.
Press ENTER