Filter
Top Products
DVD Setup Menu7
48
Background
• Default setting: Black
This specifies what the screen shows when the
player is stopped.
—
—
—
—
—
Video2
A2
Language
General
Audio1
V1
Exit
Move
Background
Video Adjust
Still Picture
On Screen Display
Angle Indicator
Gray
Black
Auto
On
On
SETUP
Component Video
Compared to a standard interlaced TV picture, a
progressive scan TV is capable of stable, flicker-
free images.
Set only if you connected the COMPONENT
VIDEO OUT to a progressive scan-compatible TV
or monitor.
Make changes to the Component Video setting in
the Setup screen Video 1 menu.
—
—
—
Audio1
Video1
Language
General
A2
V2
Exit
Move
TV Screen
Component Video
S-Video Out
Frame Search
Screen Saver
16:9(Wide
)
Progressive
Interlace
Off
Off
SETUP
• Progressive – Use this setting with TVs and
monitors that have progressive scan component
video inputs. Check the TV’s instruction manual
if you are not sure about this.
• Interlace – (default setting) use this setting
with regular TVs that are not compatible with
progressive scan. Check the TV’s instruction
manual if you are not sure about this.
Tip
If this player is set to output progressive-scan
video, it’s possible that the picture will appear
stretched when playing discs recorded in 4:3
format. This happens when the TV’s aspect ratio is
set ‘Full’. To see the picture in its correct aspect
ratio, change the TV setting to ‘Normal’.
If your TV doesn’t have settings to change the
aspect ratio of the picture, set this player to
16:9(Compressed).
Note
If you connect a TV that is not compatible with
a progressive scan signal and choose one of the
progressive scan settings, you will not be able to
see any picture at all. With your TV connected
using either the composite or S-Video terminals,
choose the Interlace setting in the Component
Video menu.
Compatibility of this unit with progressive-scan
TVs.
‘CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE “STANDARD DEFINITION” OUTPUT.