Filter
Top Products
TITLE
18
151518
ON
HIGH
CAMERA04
18
1515
18OFF
HIGH
CAMERA03
18
15
15
18
OFF
OFF
CAMERA02
181515
18
ON
LOW
CAMERA01
HUE
CLCT
BR
REC
ALARM
(CAMERA)
(iii) REC (RECORD) - Set up which channel you want to record.
ON: When an alarm input is triggered the DVR will begin recording when an alarm
is detected on this input. The DVR will record the alarming channel more
frequently. For example : when CH01 is triggered, the record method will become
1-2-1-3-1-4….
OFF: The DVR will not record when an external alarm is triggered.
(iv) BR (BRIGHTNESS)
Adjust the brightness of each channel. The level is from 0 to 63. The default setting is 37.
(v) CT (CONTRAST)
Adjust the contrast of each channel. The level is from 0 to 63. The default setting is 18.
(vi) CL (COLOR)
Adjust the color of each channel. The level is from 0 to 63. The default setting is 13.
(vii) HUE (HUE)
Adjust the hue of each channel. The level is from 0 to 63. The default setting is 00.
3. RECORD
This submenu allows you to set the Record parameters for your Hard
Disk Drive. Use this section to configure your record settings. The
selected IPS and Quality will determine how long the DVR will record
for. Use the chart in Appendix #7 to select the appropriate settings
(i) RECORD IPS – Allows you to set the Images Per Second for
recording. The available IPS settings are
1, 2, 4, 8, 15, 30. The Default setting is 30.
(ii) QUALITY – Sets the quality level of recording. Available settings are:
BASIC, NORMAL, HIGH, BEST. The default setting is:
NORMAL.
NOTE : Higher quality recording consumes more memory on your
HDD. Appendix #7 shows the different recording speed
associated with the type of setting that you select.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
-9-