Filter
Top Products
SYSTEM INCLUDES:
-3-
4 CHANNEL DVR
OWNER’S
MANUAL
CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE
SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE.
Power Adapter & Cord
(DC 19V, 2A)
Accessories pack,
including the external
alarm block
GETTING STARTED:
2. Before operating the DVR, set the systems “time” first. (refer to page.16).
1. Connect the AC power cord and plug it into an electrical outlet. The POWER LED will
illuminate orange. Other LED indicators will turn ON and illuminate RED. It takes
approximately 5 to15 seconds to boot the system with the message : “ HDD Detecting ”.
Once successfully connected, the POWER LED will change to a green color, and the
Alarm LED will be ON.
NOTE : 1. If the HDD is not installed correctly or not installed, the “HDD not found”
message will appear for 3 seconds and then return to a 4 CH Multiplexer
display mode.
2 If the keys on the DVR are locked, the default password is “0000” to disable the
key lock.
3. To switch the system (back to DVR Function), pull out the AC power cord.
Before you reconnect the power, press “FF” for the NTSC system or “REW” for
the PAL system. Note: North America is on an NTSC system, while European
countries use PAL. Reconnect the AC power cord, and the DVR will auto-detect
the change.
An 80 GB or 120GB
HDD may be included
depending on the DVR
purchased