Filter
Top Products
(iii) REC IPS - Select the images per second of recording during an ALARM. Available
settings are 1, 2, 4, 8, 15, 30. The default setting is 30.
(iv) QUALITY - There are four recording quality settings during an ALARM:
BASIC, NORMAL, HIGH, BEST.
(v) RECORD MODE - There are three recording settings :
QUAD-FRAME, QUAD-FIELD & MULTIPLEX.
5. DWELL
(i) NORM - Select to setup the time duration between each channel
rotation in the camera sequence mode displayed on the call
monitor. The duration is from 1 to 15 Sec or OFF. The
default setting is 02.
(ii) ALARM - Select the DWELL time period to be used when an alarm
input is triggered. The level is from 1 to 15 Sec or OFF.
The default setting is 02.
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(DWELL)
NORM ALARM
CAM1 01 01
CAM2 01 01
CAM3 01 01
CAM4 01 01
-11-
6. PIP
Use this section to set the cameras for Picture in Picture mode as
well as the screen position of the PIP window.
(i) FULL SCREEN
Selects the camera shown as a full screen in PIP mode.
(ii) PIP SCREEN
Selects the camera shown as a 1/9 size sub-screen in the PIP mode.
(iii) POSITION
There are six different positions where the PIP sub-screen can be
displayed on the monitor : D/L, D/M, D/R, U/L, U/M, U/R.
D/L: Down Left, D/M: Down Middle, D/R: Down Right,
U/L: Upper Left, U/M: Upper Middle, U/R: Upper Right
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
(PIP)
FULL SCREEN CAM 1
PIP SCREEN CAM 2
POSITION D/R