Filter
Top Products
14
CONNECTION-IN
CONNECTING AN EXTERNAL UNIT USING THE AUDIO/VIDEO IN JACKS
Audio Cable (Included)
Video Cable (Included)
From
Video Out
From
Audio
Out
To
Audio In
To
Video In
External Unit
NOTES FOR CONNECTING AN EXTERNAL UNIT
• If your External unit has a S-video output, connect the DVD Recorder with the S-Video input jack for
best quality, otherwise, use the A/V jacks.
• When connecting the DVD, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the DVD, make sure the power is off and both units are unplugged before making any
connections.
• If the external unit only has one audio output, the use of a “Y” connector may be necessary. Visit your
local electronics supply store.
• You can also connect the unit to the front jacks for both of the above scenarios as shown on page 15.
CONNECTING AN EXTERNAL UNIT USING THE S-VIDEO IN JACK
S-Video Cable (Not Included)
From
S-Video
Out
To
Audio In
To S-
Video In
Audio Cable (Included)
From
Audio
Out
External Unit
After connecting,
plug the AC cord into
an AC outlet, then
press the Standby
button to turn the
unit on. Press the
SOURCE button
repeatedly to select
the rear A/V jacks,
"R-AV" will appear
on the TV.
After connecting,
plug the AC cord into
an AC outlet, then
press the Standby
button to turn the
unit on. Press the
SOURCE button
repeatedly to select
the rear S-VIDEO
jacks, "R-SV" will
appear on the TV.