Filter
Top Products
41
CD/VCD BASIC OPERATION (CONTINUED)
PROGRAMMED PLAYBACK (VCD)
This unit has a 99 track programmable memory that allows you to program up to 99 tracks on any disc for playback in any
desired order. You may program 99 different tracks or you may also program certain tracks to play more than once. To
perform programmed playback, proceed as follows:
While in the Playback mode, press the DISPLAY button 1 to
bring up the control options. Select the Playback mode
option using the Navigation (➛,❿) buttons 2, then press the
ENTER button 3. Select PROG using the Navigation (➐,❷)
buttons 2, then press the ENTER button 3.
2
2
2
1
2
3
1
T
wo boxes will then appear on the screen; the left box will show
all available tracks on the DVD and the right box will show the
program. To select a track to program, select a track using the
Navigation (
➐,❷) buttons 1, then press the ADD/CLEAR
button 2; it will then be added to the right program box.
1
1
2
2
To delete a single track, select the right program box using
the Navigation (❿) button 1, then select the desired track to
delete using the Navigation (➐,❷) buttons 1, followed by
the
ADD/CLEAR button
2.
1
1
2
3
Select the top selection in the right program box, then click the
ENTER button 1 to start playback. Press the DISPLAY button
2 to exit the DISPLAY MENU.
2
1
4
TO STOP/CANCEL THE PROGRAM FUNCTION:
To cancel the Program function, press the DISPLAY button
1, select the Playback mode option using the Navigation
(
➛,❿) buttons 2, then press the ENTER button 3. Select
NORMAL using the Navigation (➐,❷) buttons 2, then press
the ENTER button
3 OR press the ST
OP
button
4 twice to
stop the program playback.
2
2
2
2
4
1
3
5
NOTE: The program memory will be kept until the
disc is changed or the unit is turned off to the
Standby mode.
☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎ ☎