Memorex MVDR2100 DVD Player User Manual


 
26
TV OPERATION
Adjust the volume level by pressing the VOLUME Up 1 or
Down button. The volume level will be indicated by a bar
on the bottom of the screen.
1
2
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 23.
Press and release the CHANNEL Up 1 or Down 2 button.
The TV automatically stops at the next channel set into
memory. This will not operate if channels are not set into
memory.
Direct Program Selection buttons (0 - 9)
Use these buttons to select a channel.
The channel number
will appear at the top left corner of the screen.
Select a channel using the Number buttons 3 followed by
the ENTER button 4.
1
4
2
3
4
Press the SOURCE button to select TV, “CH” and a
channel number will appear on the TV
2
Press the ON/STANDBY button to turn on the unit; the
STANDBY indicator will go out.
1
NOTES:
When AIR/CABLE option is set to AIR, only channels
from 002 to 069 can be selected. When set to CABLE,
channels up to 125 can be selected.
If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive up to channel 69, when my cable goes much higher?
AIR/CABLE menu option must be set to CABLE when using cable, see page 23.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.