Memorex MVDR2100 DVD Player User Manual


 
40
CD/VCD BASIC OPERATION (CONTINUED)
PROGRAMMED PLAYBACK (CD)
This unit has a 99 track programmable memory that allows you to program up to 99 tracks on any disc for playback in any
desired order. You may program 99 different tracks or you may also program certain tracks to play more than once. To
perform programmed playback, proceed as follows:
Press the OPEN/CLOSE button to open the disc tray
,
“OPEN” will appear in the display
. Insert a disc with the
label side facing up on the disc tray.
1
After loading, two boxes will appear on the screen; the left box will
show all available tracks on the disc and the right box will show
the program. To select a track to program, select a title using the
Navigation (
,) buttons 1, then press the ADD/CLEAR button
2; it will then be added to the right program box.
1
1
2
2
To delete a track, select the right program box using the
Navigation () button 1, then select the desired chapter to
delete using the Navigation (,) buttons 2, followed by
the
ADD/CLEAR button
3.
2
1
3
2
3
Select the top selection in the right program box, then click the
ENTER button to start playback.
4
TO CANCEL THE PROGRAM FUNCTION:
To cancel the Program function, select the Playback mode
option using the Navigation (
,) buttons 2, then press the
ENTER button
3. Select NORMAL using the Navigation
(
,) buttons 2, then press the ENTER button 3.
2
2
2
2
1
3
5
NOTE: The program memory will be kept until the
disc is changed or the unit is turned off to the
Standby mode.