Filter
Top Products
Four-Channel Digital Video Recorder
35
y You can change an entire day by placing the cursor on the day of the week and pressing the
button to toggle the day On or Off.
y You can change the entire calendar by placing the cursor in the upper left-hand box (above “S”
and to the left of the time line) and pressing the
button to toggle the entire calendar On and
Off.
NOTE: The Holiday (H) schedule applies to the dates you established as holidays when
setting Date/Time.
You can save your changes by highlighting OK and pressing the
button. Selecting Cancel exits
the screen without saving the changes.
Pre-Event Recording Setup Screen
Figure 49 — Pre-Event Record Setup screen.
When the DVR is in the Event Record mode, it is possible to have it record images before the event
occurs. The Pre-Event Record screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event recording. The image speed can be set
from 0.5 to 30 ips (25 ips PAL), and image quality can be selectable from High, Standard and
Low.
NOTE: When a camera is set to On, the displays on each camera screen. However, the
DVR will record the video only when events are detected.
NOTE: The pre-event recording speed is 30 images per second (25 ips for PAL) when the
resolution is set to Standard. However, when set to High, the recording speed will be
decreased to 15 images per second (12.5 ips for PAL).
You can set the amount of time to record prior to the event by adjusting the Dwell Time. You can
set the Dwell Time from 1 to 300 seconds.
NOTE: When the DVR is in the Time-Lapse mode, it ignores the pre-event settings and follows
the time-lapse settings.