User’s Manual
50
Figure 67 — LAN (DHCP) Setup screen.
Selecting ADSL (PPPoE) allows you to set up the ADSL network.
NOTE: ADSL and modem cannot be configured at the same time. If the DVR is networked via
modem, the ADSL (PPPoE) will not be selected.
Figure 68 — LAN (ADSL) Setup screen.
Highlight the box beside ID and press the
button. A virtual keyboard appears allowing you to
enter the ID for ADSL connection.
Highlight the box beside Password and press the
button. A virtual keyboard appears allowing
you to enter the password for ADSL connection.
NOTE: Entering the ID and Password and highlighting OK reads the current IP Address of the
DVR configured by the ADSL network.
NOTE: If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR
might change whenever the unit is turned on.