Filter
Top Products
User’s Manual
48
You can program the image quality for transferring to the DX-PC4U (Remote Operation Software).
Highlight the box beside Remote Quality and press the button. The image quality can be
selectable from Very High, High, Standard and Low.
LAN Setup Screen
Figure 65 — LAN (Manual) Setup screen.
Highlight the box beside Type and press the
button to select from Manual, DHCP and ADSL
(PPPoE).
Selecting Manual from the Type allows you to set up LAN parameters manually.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your
network administrator.
Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or
decrease the number.
The factory default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet Mask: 255.255.255.0
Highlight the box beside DNS Server and press the
button to enter the IP address of the DNS
server. If you set up the DNS Server, the domain name of the DVRNS server instead of the IP
address can be used during the DVRNS Server setup. Refer to the DVRNS Setup section for details.
Highlight Port Number Setup… and press the
button. The Port Number Setup screen
appears.