Filter
Top Products
7 Installation In Enclosure
55
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
1
Introduction
2
Features and
Part Names
3
Product
Introduction
4
Specifications
5
Version and
Peripheral
Devices
6
System
Configuration
7
Installation
8
Preparation and
Power Supply
Wiring
9
Input Wiring
10
High-Speed
Counters
7.3 Procedures for Installing on and Detaching from DIN Rail
7.3.2 Installation of main unit
The main unit must be installed before installing a special adapter or connector conversion adapter (FX3S-
CNV-ADP) on the enclosure.
For the connection procedure, refer to Subsection 7.5.3 and Subsection 7.5.4.
Installation procedure
1 Push out all DIN rail mounting hooks (A in the
right figure).
2 Fit the upper edge of the DIN rail mounting
groove (B in the right figure) onto the DIN rail.
3 Lock the DIN rail mounting hooks (C in the following figure) while pressing
the PLC against the DIN rail.
1
A
1
A
B
B
3
C