Filter
Top Products
48
Chapter . . .
Edit NetCommand
®
, Change or Delete Devices, Finish Screen
Finish Screen
Figure 26
To finalize your selections and complete the
NetCommand setup, select Finish from the Finish
screen.
Note: To change any of the inputs or names
for the devices, or add devices not included in
the initial settings, select Edit to display the Edit
NetCommand menu.
Figure 26. Finish screen
NetCommand does not allow you to delete
a device or change the connections for a
device (like a VCR or a DVD player) if the
device (input) is currently being displayed by
the TV.
Switch the TV to a different device from the
one you are changing or deleting. To change
the A/V receiver, you need to be listening to
the TV speakers.
IMPORTANT
Change Device Screen
Figure 24
Selecting Change from the Setup menu screen,
displays the Change screen. To change a device,
select the device by name, not type. You can change
the name or input connections to the TV and A/V
receiver. If “Other” is selected for the manufacturer
then you can also “Learn”. The rest of the screens that
follow are the same as when you Add a device.
Figure 24. Change screen
Delete Device Screen
Figure 25
Selecting Delete from the Setup menu, displays the
Delete screen. You can choose to delete a single
device by selecting the device you would like to
delete, or you can delete the entire NetCommand
configuration. After you have chosen the device, or
the entire configuration, you will be prompted to
confirm your choice to delete. If you select the Entire
Configuration, the Initial button becomes available on
the Edit NetCommand screen. If you delete a device
that you learned the remote control signals for the
learned signals are erased.
Figure 25. Delete screen