Filter
Top Products
78
79
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control (within seconds of each other), the PIP/POP
will cycle through the following display options:
• POP
side-by-side
pictures
• 3 POP
• 9 POP
• PIP large
• PIP small
• PIP/POP: off
Operation of PIP and POP
To turn PIP/POP off, wait at least 10 seconds, and
press PIP/POP. The next time you activate PIP/POP,
the last used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-1 and Ant-2.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture. Pictures from digital channels can only
be shown as the main picture.
Moving PIP Image
If no menus are onscreen, press ADJUST , , or
to move the PIP display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
Ant-2 or strobe pictures from other A/V components
in the POP display. Press PAUSE to pause or restart
automatic POP switching.
Selecting POP “Live” Image
Press ADJUST , , or to select a different POP
“live” image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side
images. Press PAUSE again to return to a “live” image.
MAIN
PICTURE
Side-by-Side
PIP Ant-1 17
Ant-12 XXXX
Standard
StereoSAP
TV-PGDLSV
SQV1
PIP
Side-by-Side cannot show the same channel or
device on both sides.
If Ant-1 or Ant-2 is the main picture, Ant-2 is not
available as a PIP, POP or Side-by-Side.
PIP/POP is not compatible with signals from
media cards.
If TV Pause is set to “Always” PIP/POP and Side-
by-Side are not available.
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
PIP Ant-117
Ant-12 XXXX
Standard
StereoSAP
TV-PGDLSV
SQV1
PIP
You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and
will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but
cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.
Ant-12XXXX
Standard
Stereo SAP
TV-PGDLSV
SQV1
IMPORTANT