Filter
Top Products
12
Chapter 1. Television Overview
Remote Control Functions: Overview
Overview
Figures on the following page
S
Slide Switch: Selects A/V product to be controlled by
the remote control. Select TV for NetCommand® device
control.
In alphabetical order:
1
ADJUST: Press , , and to navigate TV Guide
On Screen®, menus, change settings, and move the
PIP on-screen location. Operates many NetCommand
functions.
2
AUDIO: Selects and adjusts individual audio settings.
3
CANCEL/SUB: Clears SQV and some menu entries and
cancel recordings. For digital channels, adds separator
between major and sub channel numbers.
4
CH(ANNEL)/PAGE: Scans up or down through
memorized channels. When used with TV Guide On
Screen®, cable box, ChannelView, or satellite, moves up
or down one screen at a time.
5
CONNECT (WD-52528, WD-62528): Initiates IEEE 1394
peer-to-peer connections.
6
DEVICE: Displays the Device Selection menu to
select the device to view (Ant-1 and Ant-2, or devices
connected to the TV’s inputs).
7
DEVICE MENU: Displays or removes the options menu
for TV Guide On Screen and devices connected to TV
including CableCARD™, display. For VCR or DVDs the
first press displays the transport menu.
8
ENTER(WD-52528, WD-62528): Selects a channel
number or menu item.
9
ENTER/EXCH (WD-52527, WD-62527): Selects a
channel number or menu item. Exchanges PIP or POP
and main TV picture.
10
EXCH (WD-52528, WD-62528): Exchanges PIP or POP
and main TV picture.
11
FF/FWD: Fast forward or forward search with a VCR or
fast play a DVD.
12
FORMAT: Changes the shape and size of the main TV
picture.
13
GUIDE: Displays or removes TV Guide On Screen or
ChannelView for Ant-1 and 2. Displays Track List for A/V
Disc. Displays program guide for satellite receiver, or
DVD Disc menu.
14
HOME: Exits TV on-screen menus and the TV Guide On
Screen system and returns to TV viewing.
15
INFO: Displays an on-screen summary of the current
device used and any broadcast or V-Chip information
available. Cycles through available Info Box Sizes in the
TV Guide On Screen system. See Appendix D for details.
16
Light: Located on the left side for WD-52527 and
WD-62527 and on the right side for WD-52528 and
WD-62528 of the remote control, this feature illuminates
buttons or labels.
17
MUTE: Turns sound on or off.
18
Numbers: Individually selects channels or enters
information into menus.
19
PAUSE: Freeze a live TV picture when no PIP or POP
image is displayed. When PIP or POP image is visible,
pauses that image. Pauses a VCR, DVD or A/V Disc.
20
PIP CH: Scrolls up or down through memorized
channels for PIP source.
21
PIP DEVICE: Displays PIP Selection menu to select the
PIP or POP image source device.
22
PIP (WD-52527, WD-62527): Cycles through PIP choices.
23
PIP/POP (WD-52528, WD-62528): Cycles through PIP
and POP choices.
24
PLAY: Plays the VCR, DVD or A/V Disc.
25
POWER: Turns power on and off for TV and other A/V
products.
26
QV (QuickView™): Switches between the current
channel and last channel viewed.
27
REC (Record for WD-52528, WD-62528): Records
with a VCR, sets up recordings for DVCR, IEEE 1394
devices, or while in ChannelView. When Listings
screen for TV Guide On Screen is displayed, will start a
recording.
28
REC/CONNECT (WD-52527, WD-62527): Records
with a VCR, sets up recordings for DVCR, IEEE 1394
devices, or while in ChannelView. Also initiates IEEE
1394 peer-to-peer connections. When Listings screen
for TV Guide On Screen is displayed, will start a
recording.
29
REW/REV: Rewinds or reverses search with a VCR.
Reverses scan with a DVD or A/V Disc.
30
SLEEP: Sets the TV to turn off within 2 hours. See page
14 for setup instructions.
31
SQV (SuperQuickView™): Scans through memorized
lists of favorite channels.
32
STOP: Stops a VCR, DVD or A/V Disc.
33
TV MENU: Displays on-screen menu system.
34
V-CHIP: Turns On or Off the V-Chip Lock.
35
VIDEO: Selects and adjusts individual video settings.
36
VOLUME: Changes sound level.