Filter
Top Products
24
Chapter 2. Connecting
Using a CableCARD
After inserting a CableCARD into the TV back
panel CableCARD slot and powering On the TV, the
initialization process begins. An initial screen will
automatically display for a few minutes, with information
that your Cable Provider will need in order to start
service. Please write down this information before calling
your cable provider.
An example of an initial screen is shown here. Your
screen will display specific information from your cable
provider and may not look exactly like this screen.
If you were unable to write down the information, you
can press TV MENU on the remote and then enter the
number 999 and the screen will re-display. You can
also press DEVICE MENU when the CableCARD is the
selected source and you will be able to select the startup
application.
Please call XYZ Cable
at xxx-xxx-xxxx to
activate cable service.
They will need these numbers:
Host ID X-XXX-XXX-XXX-XXX
CableCARD
TM
ID: X-XXX-XXX-XXX-XXX
See owner's manual for
further information
To use a CableCARD, the primary incoming
cable must be connected to ANT-1 MAIN.
IMPORTANT
CableCARD™ Technology
CableCARD Technology
CableCARD is a nationwide system standard that allows
your local cable TV provider to supply you with an access
card customized to your account. This card allows your
TV to receive, decode and unscramble the premium
digital channels included in your cable TV subscription,
without the use of a cable box. It also allows your
cable provider to automatically update and change your
subscription. When you move to a new cable provider’s
area, you simply return the CableCARD to the original
cable provider and get a new card from your new cable
provider.
Please note that CableCARD is a new technology and
your local cable provider may not currently be offering
this service. As time passes, this system will become
broadly supported by most cable providers.
The CableCARD system is “unidirectional” which means
your cable provider can send updates to the access
card and TV, however, the TV cannot send back signals
such as requests for Video-On-Demand or Pay-per-View
request by remote control.
Digital cable channels authorized by the CableCARD
will be available on the FireWire® IEEE 1394 network
and can be shared by other products on the network.
Some digital channels or programs may not be copied
or recorded because of copy restriction limits set by the
content owners or copyright holders.
The digital television is capable of receiving analog
basic, digital basic and digital premium cable
television programming by direct connection to a
cable system providing such programming. A security
card (CableCARD) provided by your cable operator is
required to view encrypted digital programming. Certain
advanced and interactive digital cable services such as
video-on-demand, a cable operator’s enhanced program
guide and data-enhanced television services may require
the use of a set-top box. For more information call your
local cable operator.
Please see page 20 for instructions on how to insert the
CableCARD.