Mitsubishi Electronics WD-62528 Projection Television User Manual


 
14
Chapter 1. Television Overview
Sleep Timer
Setting the Sleep Timer:
1. Press SLEEP on the remote control.
2. Each press of SLEEP increases the time displayed by
30 minutes, until the maximum value of 120 minutes is
reached.
3. After 5 seconds of inactivity, the message will
disappear.
4. Press SLEEP to view the remaining time before the
timer turns the TV off.
Canceling the Sleep Timer:
1. Press SLEEP to display the on-screen message.
2. Press SLEEP repeatedly until OFF is displayed.
Note: After 5 seconds of inactivity, the message
box disappears.
Care
For Best Results from the Remote Control:
Be within 20 feet of the equipment.
Do not press two or more buttons at the same
time unless instructed.
Do not allow unit to get wet or become heated.
Avoid dropping on hard surfaces.
Do not use harsh chemicals to clean. Use only
a soft, lightly moistened cloth.
Do not mix new and old batteries.
Do not heat, take apart or throw batteries into
fire.
Use only alkaline batteries.
Hint: If the remote is in the TV layer and the TV will not
function, press POWER and 935 to reset the remote.
Remote Control Functions: Care and Sleep Timer